****** - Verified Buyer
4.5
Worked perfectly. Install was easy.I actually purchased this because my blower/leaf vac was leaking fuel. I disassembled the fuel tank and checked it for leaks, but it was fine. The blower ran fine,,, but the fuel was siphoning out of the tank until it was completely empty, and I still don't know why. After a week, no more leaking, but I will update if this changes. All that is left is to change the carburetor if it leaks again. This assembly is complete and preassembled. An American sized Allen key is required to remove all the screws to get the tank out, and a small socket wrench to remove the air cleaner assembly from the carburetor (CAREFUL not to lose the 2 carb gaskets!) Replacement is relatively straightforward, but I ran into a few difficulties: 1 - The allen screw at the bottom of the tank is hard to reach, a multi-tool allen wrench may not be long enough, you may need an old school right-angle allen key. 2 -- The tank is a SNUG fit, and I had to muscle the tank out of its little space. 3-- The tank grommet is a VERY tight fit, and took a lot of effort to get into place. I replaced this assembly because my blower was leaking fuel during storage. I checked the tank for leaks, and determined that it was siphoning every last drop out of the tank. I am replacing the lines first and will try the carb next if that fails. Damn ethanol fuel...Easy to install and now have a leaf blower that worksThis kit worked for my Husqvarna 128LD weed wacker. My model does not use a grommet and instead has two little holes in the fuel tank. I took the kit apart and used everything except for the grommet to complete the repair. If you are in the same situation, cut the end of the fuel line at an angle so it forms a tip like a spear to be able to pull the line through the hole. Then cut it flush once you have it pulled through. You won't have much excess line to work with so be mindful how much you cut.I installed this fuel line kit on my 125b blower and it works perfectly. It was relatively easy to install but I wish they would use rubber instead of plastic so it lasts longer. The original lasted only 7 years before the lines became brittle and cracked. I guess it was cheap enough that if I can get another 7 years out of this blower I would be happy.Easy to install, arrive quickly. Caveat: had some parts that didn’t fit my machine but had every part I needed otherwise.I am not mechanically inclined, but when my 5 year old blower started leaking fuel and wouldn’t start I thought id give fixing it a shot. Even if it didn’t work, i thought I’d have fun taking it apart with my six year old son.I spent about an hour online lookinking at videos of the blower being disassembled and thought I could do it. I took it apart w/o my son around and determined that the plastic fuel line had broken. I ordered this kit for 9 bucks and hoped for the best. Even if it didn’t work I thought it be fun to take apart with my son.The kit arrived in two days and my 6 year old and I took the blower apart and installed the new fuel lines.THE BLOWER STARTED ON THE FIRST PULL!!!!Saved a $120 blower with 2 hours of work and a $9 kit. Spent some time with my son and we both learned a few things. Awesome!I value my free time at $20 per hour. It took 2 hours and a $9 kit to fix a $120 blower. I’m $70 up. 10/10 would do again.Works great make sure you order by correct model and brand!Leaf blower has never worked so well. think original had a defect.
